FS 2004 Update for Pierino Primavesi's Ford Tri-Motor

First, back up the aircraft.cfg and ford5atc.air files.
I just rename them to aircraft_orig.cfg and ford5atc_orig.air



Unzip into your main Flight Simulator 9 folder with "use folder names" checked.

The modifications will add 9 positions to the Weight and Balance Settings, and 
correct the center of gravity position.

Flying note:  The neutral position of the trim gauge appears to be 1-2 notches of trim up.

So give it 2 notches of trim up before taking off.

If your aircraft is in a folder other than ford5atc, then extract the files to the correct folder.

These files are not for the FS 2004 default Ford Tri-Motor

No warranty either expressed or implied is made, and the author will not assume any
responisibility for any damage.   USE AT YOUR OWN RISK!

